products
HomeProductsMagnetic Flow Meter For Sewage/Wastewater
Magnetic Flow Meter For Sewage/Wastewater
Magnetic Flow Meter For Sewage/Wastewater
Magnetic Flow Meter For Sewage/Wastewater
Magnetic Flow Meter For Sewage/Wastewater

Magnetic Flow Meter For Sewage/Wastewater

YES-LDG
Magnetic flowmeter power supply voltage 110V AC, 220V AC or 24V DC, output signal 4-20mA, flange mounting, nominal diameter DN15~DN200 optional, with integral and remote structure design, high precision, good reliability, and various pipelines compatibility and other characteristics, suitable for flow measurement and control of industrial water, groundwater, and urban industrial wastewater.
Electromagnetic flowmeter with stable and reliable, responsive, anti-interference ability, the output signal 4-20mA, nominal diameter DN15 ~ DN200 for selection, electromagnetic flowmeter adaptable, compatible with a variety of pipelines, suitable for all conductive liquids, such as domestic water, industrial water, sewage.

Newly upgraded protective header
1.Fully protected meter head, reducing interference and more accurate signal transmission.
2.magnetic flowmeter instantaneous flow cumulative flow display.

Magnetic flowmeter adopts pure copper coil
1.Pure copper coil ensures stable and accurate signal output.
2.Improve instrument reliability.
Application
The magnetic flowmeter is used in petrochemical, iron and steel metallurgy, water supply and drainage, water conservancy irrigation, water treatment, sewage treatment station (environmental sewage control, chemical sewage, electroplating sewage), paper (pulp), mud, medicine, food and other industrial and agricultural flow measurement and control.

FAQs
Q1: Can a magnetic flow meter have perfect accuracy?
A1: In an ideal world, the flow readings from your process meter would be exactly correct, without any type of deviation. Unfortunately, this is not the case, and the errors inherent in measurement must always be identified, accounted for, and minimized as much as possible.
Q2: Does a magnetic flow meter need to be calibrated?
A2: During the production of a flowmeter, several steps are required such as coil winding, lining processing, and electrode assembly. This series of operations can cause a certain amount of error and dispersion in the device, so a calibration process is required to correct the accuracy.
Q3: How often do magnetic flow meters need to be calibrated?
A3: Magnetic recalibrates the flowmeter every two years (every two years), or at the minimum frequency specified by the manufacturer. The manufacturer's specified minimum frequency meter readings are pressure corrected and, if necessary, corrected for moisture content.
Tips: What is a magnetic flow meter?
A magnetic flowmeter or electromagnetic flowmeter is an instrument based on the principle of electromagnetic induction, which measures the flow rate of a conductive fluid by the electric potential generated by the conductive fluid passing through an external magnetic field. The structure of magnetic flowmeter mainly consists of a magnetic circuit system, measuring tube, electrode, housing, liner, converter, etc.

Model

YES-LDG

Medium

Conductivity fluid (≥5uS/cm)

Nominal Diameter *

DN15~DN200

Nominal Pressure

1.6MPa

Velocity Range

0~10m/s

Accuracy

±0.5%R

Configuration

Integral type or remote type

Highest Medium Temperature

Integral type

+80°C

Remote type

+80℃ (CR) or +120℃ (F4)

Turn-down Ratio

Integral type

20:1

Remote type

10:1

Ambient Temperature

Sensor

-25℃~+180℃

Convertor

-10℃~+60℃

Liner Materials *

Chloroprene rubber (CR) or Polytetrafluoroethylene (F4)
(Customized materials: Polyurethane rubber PU, F46)

Electrode Material *

Stainless steel 316L
(Customized electrode: Hastelloy C, Hastelloy B, Titanium, Tantalum, Platinum)

Form of Electrode

Interpolating

Number of Electrodes

Standard configuration 3-4 electrodes (two measuring electrodes plus a grounding electrode)

Output Signal

4-20mA

Cable Entry Size

M20 × 1.5 (Nylon waterproof connector)

Supply Voltage*

110V/220V AC, 50Hz/60Hz; 24V DC ±10%

Power Dissipation

≤15VA

Communication

RS-485, support standard Modbus-RTU protocol

Flange Standard

Conform to the international GB9119

Flange Material

Carbon steel

Grounding Ring Material

Stainless steel

Housing Material

Carbon steel

Protection Level

IP65

Cable Length (Remote Type)

10m connecting line (Standard)

Note: *Please note that all the options may not be listed in the selecting area, including the nominal diameter, liner materials, electrode materials and so on. If your have any requirements, please contact us.
Mag Flowmeter Flow Rate

×

Contact Us

captcha